Introducción

This guide is to help assist you in replacing the inside display screen of the Nokia 6102i. This is a well described 6 step process of how to complete the replacement.

Partes

No se requieren partes.

  1. This step does not require much force. With the screen facing up, connect the display connector to the smaller of the open connectors on the motherboard.
    • This step does not require much force.

    • With the screen facing up, connect the display connector to the smaller of the open connectors on the motherboard.

  2. Place the metal case over the top of the screen so that it snaps into place. Place the metal case over the top of the screen so that it snaps into place.
    • Place the metal case over the top of the screen so that it snaps into place.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda

    ¿Alguna vez arreglaste algo? Eso es genial.

    Comparte tu historia de reparación con #SoyUnGenio

    Todos somos Genios

    Comparte tu historia de reparación con #SoyUnGenio

  4. Insert the circuitboard into the back of the phone, with the inside screen facing down. Lightly press down on the left hand corner so the circuitboard attaches to the phone. Lightly press down on the left hand corner so the circuitboard attaches to the phone.
    • Insert the circuitboard into the back of the phone, with the inside screen facing down.

    • Lightly press down on the left hand corner so the circuitboard attaches to the phone.

  5. Snap the top cover into place so that the outside screen is visible. Press around the perimeter to secure the case. Snap the top cover into place so that the outside screen is visible. Press around the perimeter to secure the case. Snap the top cover into place so that the outside screen is visible. Press around the perimeter to secure the case.
    • Snap the top cover into place so that the outside screen is visible. Press around the perimeter to secure the case.

  6. Open the phone and insert the screws tightly. Open the phone and insert the screws tightly.
    • Open the phone and insert the screws tightly.

  7. This step does not require much force. Snap on the black piece over the exposed screws.
    • This step does not require much force.

    • Snap on the black piece over the exposed screws.

Linea de Meta

Una persona más ha completado esta guía.

Danielle

Miembro Desde 27/09/12

1 Reputación

1 Guía escrita

Equipo

Ohio State, Team 1-3, Buehl Fall 2012 Miembro de Ohio State, Team 1-3, Buehl Fall 2012

OSU-BUEHL-F12S1G3

3 Miembros

1 Guía escrita

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 456