Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
If your speaker is no longer producing sound, it may be necessary to replace the speaker altogether. This guide shows a step by step guide to fully access the speaker.
Qué necesitas
-
-
Using the thumbtab molded on the bottom of the phone, pry the back cover off using either a fingernail or a plastic opening tool.
-
-
-
-
Using a T5 screwdriver bit, remove the (6) 5.0 mm screws along the outside edge of the frame.
-
Using a metal spudger, wedge the 6 plastic tabs molded into the outer shell away from the frame to lift up and remove it.
-
-
-
Use a spudger to simultaneously leverage the shell away and the motherboard up from the body of the shell.
-
-
-
Using a metal spudger, lodge the tip underneath the speaker and between the soft foam surrounding the screen.
-
Use the metal spudger to leverage out the speaker.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.