Saltar al contenido principal
  1. Remove the Back cover by Pressing the release buttons located on either side of the battery cover Now Remove The Battery and Simcard from the slots Now Remove The Battery and Simcard from the slots
    • Remove the Back cover by Pressing the release buttons located on either side of the battery cover

    • Now Remove The Battery and Simcard from the slots

  2. Remove the two screws on either side of the back side using the microscrewdriver using the T5 bit Now Remove the Front key panel from the Main Board Carefully using the Plastic Opening Tools Now Remove the Front key panel from the Main Board Carefully using the Plastic Opening Tools
    • Remove the two screws on either side of the back side using the microscrewdriver using the T5 bit

    • Now Remove the Front key panel from the Main Board Carefully using the Plastic Opening Tools

  3. Now Remove the four screws in the front  side of the main board Now push the Board from the Battery slot side and carefully By  using the Plastic Opening Tools Separate the board from the back case or rear case Now push the Board from the Battery slot side and carefully By  using the Plastic Opening Tools Separate the board from the back case or rear case
    • Now Remove the four screws in the front side of the main board

    • Now push the Board from the Battery slot side and carefully By using the Plastic Opening Tools Separate the board from the back case or rear case

  4. Now Gently Separate the lock at the right side to remove the outer cover of the Main Board !!!!  Be Cautious that the key panel is attached at the other end
    • Now Gently Separate the lock at the right side to remove the outer cover of the Main Board

    • !!!! Be Cautious that the key panel is attached at the other end

  5. Remove the Chip which is attached to the main board Now we can separate the display from the main board and we can replace it with the new display. Now we can separate the display from the main board and we can replace it with the new display.
    • Remove the Chip which is attached to the main board

    • Now we can separate the display from the main board and we can replace it with the new display.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

LOGESAM

Miembro Desde 28/12/15

75 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 206