Repara tus cosas Comunidad Tienda

Nokero SunRay Pro Power Panel Capacitor Replacement

Introducción

Not being able to charge your device may mean you have a bad capacitor. Follow these simple steps to get yours replaced.

Qué necesitas

  1. Nokero SunRay Pro Power Panel Capacitor Replacement, Front and Back Case: paso 1, imagen 1 de 1

    • Turn over the device so that the back of the device is facing up.

    Editar

  2. Nokero SunRay Pro Power Panel Capacitor Replacement: paso 2, imagen 1 de 3 Nokero SunRay Pro Power Panel Capacitor Replacement: paso 2, imagen 2 de 3 Nokero SunRay Pro Power Panel Capacitor Replacement: paso 2, imagen 3 de 3

    • Insert the first plastic opening tool along the side to pry open the case.

    • Sliding the plastic opening tool, while inserted, along the seam may help the removal process.

    • Use a second plastic opening tool to help separate the remaining seams.

    Editar

  4. Nokero SunRay Pro Power Panel Capacitor Replacement: paso 3, imagen 1 de 2 Nokero SunRay Pro Power Panel Capacitor Replacement: paso 3, imagen 2 de 2

    • There is a long strip of double sided adhesive foam tape that prevents the back case from easily being removed.

    • Pull the back case off by applying steady pressure to remove it from the adhesive foam tape.

    Editar

  5. Nokero SunRay Pro Power Panel Capacitor Replacement: paso 4, imagen 1 de 2 Nokero SunRay Pro Power Panel Capacitor Replacement: paso 4, imagen 2 de 2

    • Use the Phillips precision screwdriver to unscrew the two 5.0 mm Phillips screws from the circuit board.

    • Remove the solar panel and circuit board from the front case.

    Editar

  6. Nokero SunRay Pro Power Panel Capacitor Replacement, Capacitor: paso 5, imagen 1 de 1

    • Use the soldering station to desolder the two contact points around the connections of the capacitor to loosen the metal.

    Editar

  7. Nokero SunRay Pro Power Panel Capacitor Replacement: paso 6, imagen 1 de 1

    • Pull the capacitor through the circuit board to remove it.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Nicholas Orr

Miembro Desde 01/20/15

229 Reputación

2 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

USF Tampa, Team 9-3, Blackwell Winter 2015 Miembro de USF Tampa, Team 9-3, Blackwell Winter 2015

USFT-BLACKWELL-W15S9G3

3 Miembros

3 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 154