Saltar al contenido principal

Nintendo Wii Remote Speaker Replacement

Qué necesitas

  1. Nintendo Wii Remote Speaker Replacement, Front Cover Plate and Batteries: paso 1, imagen 1 de 2 Nintendo Wii Remote Speaker Replacement, Front Cover Plate and Batteries: paso 1, imagen 2 de 2
    • Flip the Wii Remote over so the battery cover faces you.

    • Push up on the bottom tab.

    • Remove the battery cover.

  2. Nintendo Wii Remote Speaker Replacement: paso 2, imagen 1 de 1
    • Remove the first battery by pressing down on the positive end and pulling the battery out.

    • Remove the second battery by pushing up on the positive end and pulling the battery out.

  3. Nintendo Wii Remote Speaker Replacement: paso 3, imagen 1 de 1
    • Using a tri-point Y1 Screwdriver, remove the two center 7mm screws by turning them counterclockwise.

    • Repeat with the two bottom screws.

  4. Nintendo Wii Remote Speaker Replacement: paso 4, imagen 1 de 2 Nintendo Wii Remote Speaker Replacement: paso 4, imagen 2 de 2
    • With the flat end of a spudger, gently apply pressure to the tabs located on left side of the controller.

    • These tabs are breakable. However, if the tabs are broken the controller will still function.

    • Open the front plate like a book.

    • Small parts may fall out as you open the front plate.

    Mine is not opening like a book? What do I do?

    Micah Thompson - Contestar

    It stops short of explaining replacing rechargeable battery. Unless you’re referring to the AA’s which don’t involve removing cover

    Sticky Insides - Contestar

  5. Nintendo Wii Remote Speaker Replacement, Speaker: paso 5, imagen 1 de 3 Nintendo Wii Remote Speaker Replacement, Speaker: paso 5, imagen 2 de 3 Nintendo Wii Remote Speaker Replacement, Speaker: paso 5, imagen 3 de 3
    • Place the plastic opening tool between the edge of the speaker and the wii remote.

    • Gently lift the speaker out of the body of the Wii remote.

    In my Wii controller, the speaker is connected to two cables instead of touching the motherboard.

    Santi12008 - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Emily

Miembro Desde 04/14/13

1,509 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 3-44, Amido Spring 2013 Miembro de Cal Poly, Team 3-44, Amido Spring 2013

CPSU-AMIDO-S13S3G44

4 Miembros

26 Guías creadas

Un comentario

Thank you, u help me to fix it.

joon lew - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 8

Ultimos 30 días: 71

Todo El Tiempo: 6,694