Saltar al contenido principal

Nintendo Wii Faceplate Replacement

Qué necesitas

  1. Nintendo Wii Faceplate Replacement, Faceplate: paso 1, imagen 1 de 2 Nintendo Wii Faceplate Replacement, Faceplate: paso 1, imagen 2 de 2
    • Use a metal spudger to remove the white plastic screw covers stuck to the lower case near the front of the Wii.

  2. Nintendo Wii Faceplate Replacement: paso 2, imagen 1 de 1
    • Remove the two 8.3 mm Tri-Wing screws hidden under the covers you just removed.

  3. Nintendo Wii Faceplate Replacement: paso 3, imagen 1 de 1
    • Remove the single 5.9 mm Phillips screw under the controller port door nearest the faceplate.

  4. Nintendo Wii Faceplate Replacement: paso 4, imagen 1 de 1
    • Use a metal spudger to remove the rubber foot stuck to the side of the Wii near the DVD drive opening.

  5. Nintendo Wii Faceplate Replacement: paso 5, imagen 1 de 1
    • Remove the single 5.9 mm Phillips screw hidden under the foot you just removed.

  6. Nintendo Wii Faceplate Replacement: paso 6, imagen 1 de 2 Nintendo Wii Faceplate Replacement: paso 6, imagen 2 de 2
    • Carefully pull the faceplate away from the front of the Wii.

    • Use a pair of tweezers to disconnect the LED cable's plastic connector from the motherboard.

    • Remove the faceplate.

Conclusión

To reassemble your device, follow these instructions in reverse order.

22 personas más completaron esta guía.

3 comentarios

Any more to do if pressing the on button does nothing, its still red power light?

Kyrre - Contestar

Tanks for this guide Btw

Kyrre - Contestar

Thanks for the guide, I just wish it continued with replacing the components within the faceplate, as I wanted to replace the white shell. Still helpful though!

Cynthia - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 6

Ultimos 7 días: 46

Ultimos 30 días: 327

Todo El Tiempo: 53,315