Saltar al contenido principal

Nintendo Switch Pro Controller Battery Replacement

Qué necesitas

  1. Nintendo Switch Pro Controller Battery Replacement, Remove the screws: paso 1, imagen 1 de 1
    • Flip the controller over so the model stickers face the ceiling.

    • Use a Phillips screwdriver to remove the two black flathead 8.4 mm-long screws that secure the handles, located at the ends of the handles.

  2. Nintendo Switch Pro Controller Battery Replacement, Remove the handle covers: paso 2, imagen 1 de 3 Nintendo Switch Pro Controller Battery Replacement, Remove the handle covers: paso 2, imagen 2 de 3 Nintendo Switch Pro Controller Battery Replacement, Remove the handle covers: paso 2, imagen 3 de 3
    • Carefully remove the handle covers by pulling them away from the main body.

  3. Nintendo Switch Pro Controller Battery Replacement, Remove the screws: paso 3, imagen 1 de 1
    • Use a Phillips screwdriver to remove the four silver 6.8 mm-long screws that secure the clear back plastic cover.

  4. Nintendo Switch Pro Controller Battery Replacement, Unclip the plastic cover: paso 4, imagen 1 de 3 Nintendo Switch Pro Controller Battery Replacement, Unclip the plastic cover: paso 4, imagen 2 de 3 Nintendo Switch Pro Controller Battery Replacement, Unclip the plastic cover: paso 4, imagen 3 de 3
    • Carefully pry away the clear plastic cover using your fingernail.

  5. Nintendo Switch Pro Controller Battery Replacement, Remove the clear plastic cover: paso 5, imagen 1 de 1
    • Remove the clear plastic cover.

  6. Nintendo Switch Pro Controller Battery Replacement, Remove the battery: paso 6, imagen 1 de 3 Nintendo Switch Pro Controller Battery Replacement, Remove the battery: paso 6, imagen 2 de 3 Nintendo Switch Pro Controller Battery Replacement, Remove the battery: paso 6, imagen 3 de 3
    • Remove the lithium-ion battery by using a fingernail or plastic opening tool to pry it up on the left side.

    • Only a small amount of force is needed.

Conclusión

To reassemble your device, follow these instructions in reverse order.

For optimal performance, calibrate your newly installed battery after completing this guide.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

34 personas más completaron esta guía.

Daniel Tagalog

Miembro Desde 10/10/19

1,592 Reputación

3 Guías creadas

Equipo

Cal Poly, Team S11-G2, Regan Fall 2019 Miembro de Cal Poly, Team S11-G2, Regan Fall 2019

CPSU-REGAN-F19S11G2

5 Miembros

42 Guías creadas

9 comentarios

now what after taking the battery out

Seani M - Contestar

Install the replacement battery and follow the steps in reverse order…

frzno72 -

easy peasy only have to recycle battery

Dan Carroll - Contestar

Where can I buy genuine ctr-003 batteries in germany/europe?

smol_tsukiko - Contestar

You can buy them directly in the iFixit Europe or in your case in the Germany store.

Henrynaja -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 69

Ultimos 7 días: 389

Ultimos 30 días: 1,692

Todo El Tiempo: 55,552