Saltar al contenido principal

Nintendo Switch Lite R button Replacement

Qué necesitas

  1. Nintendo Switch Lite R button Replacement, R button: paso 1, imagen 1 de 1
    • Remove the four 6.3 mm long screws on the back using a Y1 tri-point screwdriver.

  2. Nintendo Switch Lite R button Replacement: paso 2, imagen 1 de 1
    • Remove the two 3.6 mm long screws on the top using a Phillips #00 screwdriver.

  3. Nintendo Switch Lite R button Replacement: paso 3, imagen 1 de 1
    • Remove the two 3.6 mm long screws on the bottom using a Phillips #00 screwdriver.

  4. Nintendo Switch Lite R button Replacement: paso 4, imagen 1 de 1
    • Open up the device by inserting the opening tool into the speaker grille and twist the opening tool to open the device.

    • Twist the opening tool gently to avoid damaging any parts inside the device.

  5. Nintendo Switch Lite R button Replacement: paso 5, imagen 1 de 1
    • Remove the two 4.5 mm long screws on the back of the ZR button using a Phillips #00 screwdriver.

  6. Nintendo Switch Lite R button Replacement: paso 6, imagen 1 de 1
    • Carefully remove the R button.

  7. Nintendo Switch Lite R button Replacement: paso 7, imagen 1 de 1
    • Use a napkin with rubbing alcohol to clean the area.

  8. Nintendo Switch Lite R button Replacement: paso 8, imagen 1 de 1
    • Replace the old R button with a new R button carefully.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Omar Hernandez

Miembro Desde 10/23/23

187 Reputación

1 Guía escrita

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 50

Ultimos 30 días: 246

Todo El Tiempo: 1,168