Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Nintendo DSi XL Power Board Replacement

Introducción

Get the power flowing through your DSi XL by replacing the power board.

Qué necesitas

  1. Nintendo DSi XL Power Board Replacement, Battery: paso 1, imagen 1 de 2 Nintendo DSi XL Power Board Replacement, Battery: paso 1, imagen 2 de 2

    • Remove the two Phillips screws securing the battery cover to the back of the handheld console.

    • Lift the battery cover off the back of the DSi XL.

    Traducir

  2. Nintendo DSi XL Power Board Replacement: paso 2, imagen 1 de 1

    • Lift the battery from the DSi XL.

    Traducir

  3. Nintendo DSi XL Power Board Replacement, Lower Case: paso 3, imagen 1 de 3 Nintendo DSi XL Power Board Replacement, Lower Case: paso 3, imagen 2 de 3 Nintendo DSi XL Power Board Replacement, Lower Case: paso 3, imagen 3 de 3

    • Remove the four rubber screw covers on the lower case by prying them up with a push pin.

    Traducir

  4. Nintendo DSi XL Power Board Replacement: paso 4, imagen 1 de 1

    • Remove the following seven Phillips screws that secure the lower case to the rest of the DSi XL:

    • Four silver 5.3 mm screws

    • Two black 5.3 mm screws

    • One black 2.5 mm screw

    Traducir

  6. Nintendo DSi XL Power Board Replacement: paso 5, imagen 1 de 3 Nintendo DSi XL Power Board Replacement: paso 5, imagen 2 de 3 Nintendo DSi XL Power Board Replacement: paso 5, imagen 3 de 3

    • Turn the DSi XL over, and open the display.

    • Insert a spudger between the upper and lower case at the bottom left corner of the DSi.

    • Slide the spudger along the bottom edge of the upper case to release the latches securing the upper case to the lower case.

    Traducir

  7. Nintendo DSi XL Power Board Replacement: paso 6, imagen 1 de 2 Nintendo DSi XL Power Board Replacement: paso 6, imagen 2 de 2

    • Close the display and turn the DSi XL over.

    • Lift the lower case from the front edge.

    • Rotate the lower case away from the DSi.

    • The lower case cannot be completely removed yet, since it is still connected to the motherboard.

    Traducir

  8. Nintendo DSi XL Power Board Replacement: paso 7, imagen 1 de 2 Nintendo DSi XL Power Board Replacement: paso 7, imagen 2 de 2

    • Using a spudger, pry the SD card/right shoulder button connector off its socket.

    • Pry the volume button/left shoulder button connector off its socket on the motherboard with a spudger.

    Traducir

  9. Nintendo DSi XL Power Board Replacement, Power Board: paso 8, imagen 1 de 2 Nintendo DSi XL Power Board Replacement, Power Board: paso 8, imagen 2 de 2

    • Using the flat end of a spudger, flip up the retaining flap on the ZIF connector for the D-pad/power button cable.

    • With the pointed end of the spudger, pull the D-pad/power button cable from its connector on the motherboard.

    Traducir

  10. Nintendo DSi XL Power Board Replacement: paso 9, imagen 1 de 1

    • Using the flat end of the spudger, carefully pry the battery cable out of its socket on the motherboard.

    • Use caution, as the wires are very fragile and could come out of the connector if pulled on too hard.

    Traducir

  11. Nintendo DSi XL Power Board Replacement: paso 10, imagen 1 de 2 Nintendo DSi XL Power Board Replacement: paso 10, imagen 2 de 2

    • Remove the seven 2.5 mm silver screws securing the power board to the upper case.

    • Lift the power board off the upper case.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Autor

con 7 otros colaboradores

Brett Hartt

Miembro Desde 04/12/10

127,897 Reputación

143 Guías creadas

Insignias: 52

+ 49 más insignias

Equipo

iFixit Miembro de iFixit

Staff

135 Miembros

16,817 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 5

Ultimos 7 días: 23

Ultimos 30 días: 80

Todo El Tiempo: 17,038