Repara tus cosas Comunidad Tienda

Nintendo DSi XL Lower Case Replacement

Introducción

Replaced your broken or scratched up lower case with a shiny new one.

Qué necesitas

  1. Nintendo DSi XL Lower Case Replacement, Battery: paso 1, imagen 1 de 2 Nintendo DSi XL Lower Case Replacement, Battery: paso 1, imagen 2 de 2

    • Remove the two Phillips screws securing the battery cover to the back of the handheld console.

    • Lift the battery cover off the back of the DSi XL.

    Editar

  2. Nintendo DSi XL Lower Case Replacement: paso 2, imagen 1 de 1

    • Lift the battery from the DSi XL.

    Editar

  3. Nintendo DSi XL Lower Case Replacement, Lower Case: paso 3, imagen 1 de 3 Nintendo DSi XL Lower Case Replacement, Lower Case: paso 3, imagen 2 de 3 Nintendo DSi XL Lower Case Replacement, Lower Case: paso 3, imagen 3 de 3

    • Remove the four rubber screw covers on the lower case by prying them up with a push pin.

    Editar

  5. Nintendo DSi XL Lower Case Replacement: paso 4, imagen 1 de 1

    • Remove the following seven Phillips screws that secure the lower case to the rest of the DSi XL:

    • Four silver 5.3 mm screws

    • Two black 5.3 mm screws

    • One black 2.5 mm screw

    Editar

  6. Nintendo DSi XL Lower Case Replacement: paso 5, imagen 1 de 3 Nintendo DSi XL Lower Case Replacement: paso 5, imagen 2 de 3 Nintendo DSi XL Lower Case Replacement: paso 5, imagen 3 de 3

    • Turn the DSi XL over, and open the display.

    • Insert a spudger between the upper and lower case at the bottom left corner of the DSi.

    • Slide the spudger along the bottom edge of the upper case to release the latches securing the upper case to the lower case.

    Editar

  7. Nintendo DSi XL Lower Case Replacement: paso 6, imagen 1 de 2 Nintendo DSi XL Lower Case Replacement: paso 6, imagen 2 de 2

    • Close the display and turn the DSi XL over.

    • Lift the lower case from the front edge.

    • Rotate the lower case away from the DSi.

    • The lower case cannot be completely removed yet, since it is still connected to the motherboard.

    Editar

  8. Nintendo DSi XL Lower Case Replacement: paso 7, imagen 1 de 2 Nintendo DSi XL Lower Case Replacement: paso 7, imagen 2 de 2

    • Using a spudger, pry the SD card/right shoulder button connector off its socket.

    • Pry the volume button/left shoulder button connector off its socket on the motherboard with a spudger.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Autor

con 5 otros colaboradores

David Hodson

Miembro Desde 04/13/10

150,467 Reputación

127 Guías creadas

Insignias: 53

+ 50 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 14

Ultimos 30 días: 62

Todo El Tiempo: 8,549