Introducción

This guide will assist in removing the top cover of the Nintendo 64.

Partes

No se requieren partes.

  1. Remove the expansion pack cover by pushing in the tab and pulling out.
    • Remove the expansion pack cover by pushing in the tab and pulling out.

  2. If your system uses a jumper pack, the same procedure applies to remove it.
    • If your system uses a jumper pack, the same procedure applies to remove it.

    • A small spoon can be used in place of a spudger.

    • Lever the expansion pack out using a metal spudger.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Remove the six screws on the bottom side indicated in the example with a gamebit head or screwdriver.
    • Remove the six screws on the bottom side indicated in the example with a gamebit head or screwdriver.

  5. Remove the two front feet of the N64.
    • Remove the two front feet of the N64.

  6. Rotate to top side up and lift off top cover.
    • Rotate to top side up and lift off top cover.

Conclusión

To reassemble your device, follow these instructions in reverse order.

15 personas más completaron esta guía.

bbdiamond13

Miembro Desde 03/11/09

292 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 5-4, Regan Fall 2009 Miembro de Cal Poly, Team 5-4, Regan Fall 2009

CPSU-REGAN-F09S5G4

7 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 14

Últimos 7 Días: 59

Últimos 30 Días: 224

Todo El Tiempo: 30,877