Saltar al contenido principal

Introducción

Removing the battery is essential to the removal of other components on the Nintendo 3DS XL. Please remember to have the device powered off when following this guide.

  1. Ensure your device is powered off before proceeding. Failure to do so may result in electrical shock or damage to the device.
    • Ensure your device is powered off before proceeding. Failure to do so may result in electrical shock or damage to the device.

    • Place the 3DS upside down. Remove the game card, headphones, charging cable, stylus, or anything else that may be connected to the device.

  2. Using a JIS #0 screwdriver, loosen the two black screws on the back.
    • Using a JIS #0 screwdriver, loosen the two black screws on the back.

    • The screws are held in place by captive washers and should not be completely removed.

  3. Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora

    Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora
  4. Once the screws are loosened, pry open the back cover.
    • Once the screws are loosened, pry open the back cover.

  5. The battery is located on the left hand side of the 3DS - to remove, use the small gap located at the top-middle and pull up with a pointed tool.
    • The battery is located on the left hand side of the 3DS - to remove, use the small gap located at the top-middle and pull up with a pointed tool.

Conclusión

To reassemble your device, follow these instructions in reverse order.

9 personas más completaron esta guía.

Kobbe Farwick

Miembro Desde 01/04/15

1,270 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 24-4, Lancaster Spring 2015 Miembro de Cal Poly, Team 24-4, Lancaster Spring 2015

CPSU-LANCASTER-S15S24G4

4 Miembros

12 Guías creadas

Añadir comentario

Ver Estadísticas:

Past 24 Hours: 2

Past 7 Days: 14

Past 30 Days: 40

Global: 2,949