Saltar al contenido principal

Nintendo 3DS Circle Pad Joystick Replacement

Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.

Qué necesitas

  1. Nintendo 3DS Circle Pad Joystick Replacement, Circle Pad Joystick: paso 1, imagen 1 de 1
    • Remove the two 7.7 mm Phillips screws securing the back of the Circle Pad to the motherboard.

  2. Nintendo 3DS Circle Pad Joystick Replacement: paso 2, imagen 1 de 3 Nintendo 3DS Circle Pad Joystick Replacement: paso 2, imagen 2 de 3 Nintendo 3DS Circle Pad Joystick Replacement: paso 2, imagen 3 de 3
    • Use the flat end of a spudger to pry the back of the Circle Pad off the motherboard.

    • Lift the Circle Pad joystick off the motherboard and lay it on its back so that the ribbon cable connector is accessible.

  3. Nintendo 3DS Circle Pad Joystick Replacement: paso 3, imagen 1 de 3 Nintendo 3DS Circle Pad Joystick Replacement: paso 3, imagen 2 de 3 Nintendo 3DS Circle Pad Joystick Replacement: paso 3, imagen 3 de 3
    • Use the flat end of a spudger or your fingernail to flip up the retaining flap on the Circle Pad ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • Lift the Circle Pad joystick off the motherboard.

  4. Nintendo 3DS Circle Pad Joystick Replacement: paso 4, imagen 1 de 2 Nintendo 3DS Circle Pad Joystick Replacement: paso 4, imagen 2 de 2
    • To decrease the chance of losing it during repairs, you may want to remove the two thin pads underneath the Circle Pad joystick.

    • Use a spudger or screwdriver to lift the pads up and remove them from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

David Hodson

Miembro Desde 04/13/10

150,580 Reputación

127 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 13

Todo El Tiempo: 374