Repara tus cosas Comunidad Tienda

Nintendo 3DS Back Cover Replacement

Introducción

Removing the back cover to access the battery and internals of the Nintendo 3DS.

Qué necesitas

  1. Nintendo 3DS Back Cover Replacement, Back Cover: paso 1, imagen 1 de 1

    • Unscrew the four Phillips #00 screws along the top of the back cover.

    • The screws are held in place by locking washers, and will not come out of the back cover.

    • The comments section is full of unlucky souls who will tell you that the screws here through step 4 will strip incredibly easily. Press down fairly hard, and go slow.

    Traducir

  3. Nintendo 3DS Back Cover Replacement: paso 2, imagen 1 de 2 Nintendo 3DS Back Cover Replacement: paso 2, imagen 2 de 2

    • Hold the device in one hand and turn it over.

    • Grab the top edge of the back cover with your opposite hand so that the cover does not fall back into place.

    • Flip the 3DS over again so that the back cover is facing up.

    • Pull the back cover up and away from the rest of the device to remove it.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

18 personas más completaron esta guía.

Autor

con 6 otros colaboradores

David Hodson

Miembro Desde 04/13/10

150,529 Reputación

127 Guías creadas

Insignias: 53

+ 50 más insignias

2 comentarios

Anybody know where to buy replacement back covers for this original 3DS model? I’m finding that a lot of used 3DS’s from this era have 3rd party battery packs and the original cover is lost.

CORED3SIGN - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 13

Ultimos 7 días: 121

Ultimos 30 días: 466

Todo El Tiempo: 25,510