Saltar al contenido principal

Introducción

This guide for the Nintendo 2DS will teach you how to access the trigger buttons to remove them for cleaning or replacement.

Partes

No se especificaron partes.

  1. Remove the two Phillips screws securing the upper rear panel.
    • Remove the two Phillips screws securing the upper rear panel.

    • The screws will not completely detach from the back panel.

  2. Hinge the upper rear panel upwards and outwards to remove it. Hinge the upper rear panel upwards and outwards to remove it.
    • Hinge the upper rear panel upwards and outwards to remove it.

  3. Remove the battery from its housing by lifting it up from the side closest to the outside edge. Remove the battery from its housing by lifting it up from the side closest to the outside edge. Remove the battery from its housing by lifting it up from the side closest to the outside edge.
    • Remove the battery from its housing by lifting it up from the side closest to the outside edge.

  4. Kits de Reparación de Android

    A new screen or battery is one kit away.

    Comprar Ahora

    Kits de Reparación de Android

    A new screen or battery is one kit away.

    Comprar Ahora
  5. Remove the ten Phillips screws attaching the rear panel.
    • Remove the ten Phillips screws attaching the rear panel.

  6. The rear panel is attached to the motherboard by a ribbon cable, so be careful not to lift the rear panel too far from the device.
    • The rear panel is attached to the motherboard by a ribbon cable, so be careful not to lift the rear panel too far from the device.

    • Carefully pull the rear panel straight up from the device.

  7. Carefully flip the back panel over to locate the attached ribbon cable.
    • Carefully flip the back panel over to locate the attached ribbon cable.

    • Remove the two Phillips screws attaching the ribbon cable to the rear panel.

    • Take the opportunity to remove the Left and Right triggers, they have hinges that may break and springs that may jump away.

  8. The trigger buttons have small springs attached to them, so be careful when removing the buttons from the device. Pull the trigger button away from the device to remove it.
    • The trigger buttons have small springs attached to them, so be careful when removing the buttons from the device.

    • Pull the trigger button away from the device to remove it.

Conclusión

To reassemble your device, follow these instructions in reverse order.

14 personas más completaron esta guía.

Fina Beauchamp

Miembro Desde 12/01/15

2,210 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 70-1, Forte Winter 2015 Miembro de Cal Poly, Team 70-1, Forte Winter 2015

CPSU-FORTE-W15S70G1

4 Miembros

20 Guías creadas

Nice job! My right button was jammed for at least two years. Now I can finally demolish my friends in Mariokart.

Minecrafter Pig - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 8

Últimos 7 Días: 46

Últimos 30 Días: 181

Todo El Tiempo: 14,749