Repara tus cosas Comunidad Tienda

Ninja Coffee Bar CF080 Heated Plate Replacement

Introducción

This guide will show how to remove the heated plate from the coffee machine.

Qué necesitas

  1. Ninja Coffee Bar CF080 Heated Plate Replacement, Heated Plate: paso 1, imagen 1 de 1

    • Face the machine bottom towards you.

    Editar

  2. Ninja Coffee Bar CF080 Heated Plate Replacement: paso 2, imagen 1 de 2 Ninja Coffee Bar CF080 Heated Plate Replacement: paso 2, imagen 2 de 2

    • Unscrew six 0.6cm screws by holding the bottom board with Torx #10 screwdriver to remove the board.

    • Unscrew one 0.6 cm screw with PH1 screwdriver to remove the board.

    Editar

  3. Ninja Coffee Bar CF080 Heated Plate Replacement: paso 3, imagen 1 de 3 Ninja Coffee Bar CF080 Heated Plate Replacement: paso 3, imagen 2 de 3 Ninja Coffee Bar CF080 Heated Plate Replacement: paso 3, imagen 3 de 3

    • With moderate force remove and place the "plastic opening tool" between the divide in order to remove the bottom board.

    Editar

  5. Ninja Coffee Bar CF080 Heated Plate Replacement: paso 4, imagen 1 de 3 Ninja Coffee Bar CF080 Heated Plate Replacement: paso 4, imagen 2 de 3 Ninja Coffee Bar CF080 Heated Plate Replacement: paso 4, imagen 3 de 3

    • Remove the bottom board with moderate force.

    Editar

  6. Ninja Coffee Bar CF080 Heated Plate Replacement: paso 5, imagen 1 de 1

    • Unscrew eight 0.6cm sized screws with Phillips #1 screwdriver, holding the silver secures on the sides of the heated plate.

    • Four screws on each side, two silver secures to remove the securers, located on the sliver bar holding the heated plate (one on each end).

    Editar

  7. Ninja Coffee Bar CF080 Heated Plate Replacement: paso 6, imagen 1 de 1

    • Unscrew two 0.6cm sized screws Phillips #1 screwdriver.

    • The silver bar will fall off once screws are removed.

    Editar

  8. Ninja Coffee Bar CF080 Heated Plate Replacement: paso 7, imagen 1 de 2 Ninja Coffee Bar CF080 Heated Plate Replacement: paso 7, imagen 2 de 2

    • Remove the heated plate from the machine with easy glide.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 6 otros colaboradores

Elizabeth Nguyen

Miembro Desde 09/11/17

416 Reputación

3 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

CSU Fullerton, Team S1-G1, Bruce Fall 2017 Miembro de CSU Fullerton, Team S1-G1, Bruce Fall 2017

CSUF-BRUCE-F17S1G1

4 Miembros

5 Guías creadas

Un comentario

Where do you get a replacement plate at?

Timothy Sick - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 6

Todo El Tiempo: 792