Repara tus cosas Comunidad Tienda

Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement

Introducción

The water reservoir hanger is located on the left side of the brew basket and filter. This small component is crucial for making sure the water reservoir is secure and attached to the rest of the device. Follow this guide to replace the water reservoir hanger and resecure your water reservoir.

Qué necesitas

  1. Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement, Water Reservoir Clip: paso 1, imagen 1 de 2 Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement, Water Reservoir Clip: paso 1, imagen 2 de 2

    • Remove single 6mm #1 Phillips head screw from the side of the unit and four 6mm screws from under the basket area.

    Traducir

  3. Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement: paso 2, imagen 1 de 2 Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement: paso 2, imagen 2 de 2

    • Gently pry the upper panel up from the unit.

    Traducir

  4. Ninja Coffee Bar® Single-Serve System Water Reservoir Hanger Replacement: paso 3, imagen 1 de 1

    • Inside the panel, remove the two 6mm #1 Phillips head screws. Remove and replace water reservoir clip as necessary.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

CJ Berg

Miembro Desde 11/05/18

444 Reputación

4 Guías creadas

Insignias: 5

+ 2 más insignias

Equipo

UMass Dartmouth, Team S5-G4, Gulbrandsen Fall 2018 Miembro de UMass Dartmouth, Team S5-G4, Gulbrandsen Fall 2018

UMASSD-GULBRANDSEN-F18S5G4

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 801