Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a PH00 screwdriver, remove the two 5.3 mm Phillips screws from the flash casing.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a plastic opening tool and carefully pry open the top casing of the flash.
-
Then, lift off the top casing of the flash.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully unclip the bulb casing from the plastic casing using tweezers.
-
Remove the black and white tape on the bulb casing.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the rubber stopper on the left and right side of the bulb.
-
Separate the rubber stopper from the white and black tape.
-
The bulb can now be slid out and replaced.
-
Cancelar: No complete esta guía.
8 personas más completaron esta guía.
2 comentarios
Hi guys do you know where to get this bulb?please help