Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Nikon D40 Flash Pin Replacement

Qué necesitas

  1. Nikon D40 Flash Pin Replacement, Flash Pin: paso 1, imagen 1 de 1
    • Turn off the camera and remove the battery.

  2. Nikon D40 Flash Pin Replacement: paso 2, imagen 1 de 1
    • Pry the flash open using the plastic opening tool.

  3. Nikon D40 Flash Pin Replacement: paso 3, imagen 1 de 1
    • Remove the two Phillips #0 3.0 mm screws from the front of the flash compartment using the small Phillips Head screwdriver.

  4. Nikon D40 Flash Pin Replacement: paso 4, imagen 1 de 2 Nikon D40 Flash Pin Replacement: paso 4, imagen 2 de 2
    • Pry off the back plastic of the flash compartment using the plastic opening tool.

    • When it is time to reassemble the flash module, a certain amount of force and precise alignment will be required.

  5. Nikon D40 Flash Pin Replacement: paso 5, imagen 1 de 2 Nikon D40 Flash Pin Replacement: paso 5, imagen 2 de 2
    • On the left of the camera you will see a metal spring.

    • Unscrew the Phillips #0 3.0 mm screw holding the spring in place, using the small Phillips Head screwdriver.

  6. Nikon D40 Flash Pin Replacement: paso 6, imagen 1 de 1
    • Remove metal spring and replace with new spring.

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Lindsey Chase

Miembro Desde 01/21/14

227 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 6-19, Maness Winter 2014 Miembro de Cal Poly, Team 6-19, Maness Winter 2014

CPSU-MANESS-W14S6G19

4 Miembros

7 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 17

Todo El Tiempo: 3,767