Nikon Coolpix S800c Motherboard Replacement Guide

Introducción

In this guide, we will go over the steps to remove the motherboard from a Nikon Coolpix S800c.

Qué necesitas

Paso 1 Back Panel/Touch Screen

Nikon Coolpix S800c Motherboard Replacement Guide, Back Panel/Touch Screen: paso 1, imagen 1 de 2

Nikon Coolpix S800c Motherboard Replacement Guide, Back Panel/Touch Screen: paso 1, imagen 2 de 2

Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit).

Traducir

Paso 2

Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera.

Traducir

Paso 3 Motherboard

Nikon Coolpix S800c Motherboard Replacement Guide, Motherboard: paso 3, imagen 1 de 1

Unscrew all 6 visible screws that secure the motherboard into place using a Phillips head screwdriver (found in iFixit tool kit).

Traducir

Paso 4

Pull the shown panel off of the motherboard to expose the Image sensor connection

Traducir

Paso 5

Lift tab up to remove the Image sensor connection strip.

Traducir

Paso 6

Nikon Coolpix S800c Motherboard Replacement Guide: paso 6, imagen 3 de 3

Pull the gray panels back to allow the hidden micro usb and hdmi insert connectors to come free.
Use a Metal Spudger to help with the process to get these connectors free from the frame.

Traducir

Paso 7

Using a Metal Spudger, lift the motherboard up from the body of the camera.

Traducir

Paso 8

Pull the motherboard off of the main body of the camera.

Traducir

Conclusión

Soldered wires attaching the motherboard to the camera body will need to be disconnected at the motherboard-end and the new wires on the replacement motherboard will need to be soldered on. To reassemble your device, follow these instructions in reverse order.