Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

If the screen on your Nikon Coolpix S5200 is unresponsive or not working, use this repair guide to replace the entire screen,

Partes

No se especificaron partes.

  1. There are four 0.1 mm screws holding the front and back of the camera together all along the outside of the camera There should be four screws There should be four screws
    • There are four 0.1 mm screws holding the front and back of the camera together all along the outside of the camera

    • There should be four screws

  2. Use the Phillips Head screw driver head to remove the four 0.1 mm screws surrounding the outer edges of the camera
    • Use the Phillips Head screw driver head to remove the four 0.1 mm screws surrounding the outer edges of the camera

  3. Pull the plastic back cover off of and away from the LCD screen
    • Pull the plastic back cover off of and away from the LCD screen

  4. ABRIR TODAS LAS PESTAÑAS

    Kits de actualización de RAM para Mac

    Compra kits

    Suficiente RAM
    para todas las pestañas

    Compra kits
  5. Carefully remove the LCD screen from the silver plate that once held it in place by pulling it away from the internal components
    • Carefully remove the LCD screen from the silver plate that once held it in place by pulling it away from the internal components

  6. Remove the six designated screws sized 0.1 mm from the metal plate using a Phillip's Head screwdriver in size PH00.
    • Remove the six designated screws sized 0.1 mm from the metal plate using a Phillip's Head screwdriver in size PH00.

  7. Lift the metal plate away from the internal components of the camera
    • Lift the metal plate away from the internal components of the camera

  8. Carefully remove the LCD screen by pulling it away from the camera. Repeat these steps in reverse order to install the new LCD screen. Carefully remove the LCD screen by pulling it away from the camera. Repeat these steps in reverse order to install the new LCD screen.
    • Carefully remove the LCD screen by pulling it away from the camera. Repeat these steps in reverse order to install the new LCD screen.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Shouldn't the replacement LCD screen be considered a part? It is in fact very difficult to replace it without having the part to replace.

joshronsen - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 6

Todo El Tiempo: 675