Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
You will need a #00 phillip's head screwdriver and a black spudger (or equivalent tool).
Qué necesitas
-
-
Remove all five screws from the bottom of the camera using a Phillips #00 screwdriver.
-
-
-
-
Find the five screws on the metal plate and remove them. One of them is in a hole in the corner of the metal plate.
-
Also remove the screw at the bottom of the camera.
-
Carefully lift metal plate from the right side to reveal a ribbon connected to the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
2 comentarios
question: any source for replacement lens block ? can't find any on the internet
question: any source for lens block ? I can't find any on the internet