Saltar al contenido principal

Partes

No se especificaron partes.

  1. Nikon Coolpix L610 Plastic Cover Replacement, Plastic Cover: paso 1, imagen 1 de 2 Nikon Coolpix L610 Plastic Cover Replacement, Plastic Cover: paso 1, imagen 2 de 2
    • Remove the four (3.20 mm) Phillips #00 screws at the bottom of the device.

  2. Nikon Coolpix L610 Plastic Cover Replacement: paso 2, imagen 1 de 1
    • Remove the top (4.10 mm) Phillips #00 screw adjacent to the battery compartment.

    • Remove the bottom (3.20 mm) Phillips #00 screw adjacent to the battery compartment.

  3. Nikon Coolpix L610 Plastic Cover Replacement: paso 3, imagen 1 de 1
    • Remove the top (4.20 mm) Phillips #00 screw adjacent to the mic side of the camera and opposite the battery side.

    • Remove the lower (3.20 mm) Phillips #00 screw adjacent to the mic side of the camera and opposite of the battery side.

  4. Nikon Coolpix L610 Plastic Cover Replacement: paso 4, imagen 1 de 3 Nikon Coolpix L610 Plastic Cover Replacement: paso 4, imagen 2 de 3 Nikon Coolpix L610 Plastic Cover Replacement: paso 4, imagen 3 de 3
    • Separate the case using the plastic prying tool. This can be done by placing the tool in the position that is shown and in the position on the left side of the camera.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jeremy

Miembro Desde 21/01/15

982 Reputación

5 Guías creadas

Equipo

USF Tampa, Team 9-4, Brown Winter 2015 Miembro de USF Tampa, Team 9-4, Brown Winter 2015

USFT-BROWN-W15S9G4

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 3

Ultimos 30 días: 11

Todo El Tiempo: 1,453