Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use your finger tip to slide the battery release tab toward the battery symbol on the E5700.
-
Open the battery door.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn to the bottom of the camera.
-
Remove the two Phillips screws located directly below the back monitor
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the camera to the side with the memory card slot and open the compartment for the CF card.
-
Remove the top two Phillips screws closest to the back panel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn to the back of the camera.
-
Remove the top most Phillips screw on the back panel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn to the last side of the back panel.
-
Remove the Phillips screw below the eyepiece.
-
Remove the Phillips screw located above the speaker.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Now gently unplug the two wires at the bottom of the panel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Finish pulling away the back panel.
-
Turn the camera to its non-grip side.
-
Remove the Phillips screw located above the strap holder.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Open the CF card slot.
-
Remove the Phillips screw near the top of the camera.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn to the front of the camera.
-
Lift up the corner of the grip pad nearest to the flash bulb.
-
Remove the Phillips screw underneath the grip pad.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift up the flash bulb container.
-
Remove the two Phillips screws located near the base of the section.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Open the battery compartment.
-
Remove the Phillips screw located at the bottom of the battery compartment.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Begin to lift the top cover from the rest of the camera.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
In order to pull the top panel without removing the flash unit. You must remove the flash top cover, taking away the screw under the bulb (see image). then gently remove the plastic top cover. IMPORTANT: discharge the condenser as soon as possible (the flash wires are now exposed, and dangerous ).
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unplug the orange ribbon wire from the back of the camera.
-
Unplug the two blue ribbon wires from the back of the camera.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the Phillips screws on both sides of the flash bulb mount.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the top panel up and pull the flash bulb housing away from the rest of the top panel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unplug the orange ribbon and the other wires and finish carefully removing the top panel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove all four of the screws on the bottom of the camera.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two Phillips screws located underneath the CF card cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two screws on the left side of the camera.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unplug the blue and grey set of wires near the top of the grip.
-
Unplug the blue ribbon wire located at the bottom-left side of the camera.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the four black screws at the corners of the lens housing.
-
Cancelar: No complete esta guía.
3 personas más completaron esta guía.
Un comentario
bonjour,
je viens vers vous pour vous demandez OU je vais trouver les pièces pour remettre en état j'ai un Nikon Coolpix 5700 il a l'écran tout noir sur l'écran tout noir juste le paramètre de l'appareille.
je n'arrive pas a trouver le pièce sur quel cite je pourrais trouvé sais pièces
je tient beaucoup a mon appareil
merci de me renseigné cordialement