Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use your finger tip to slide the battery release tab toward the battery symbol on the E5700.
-
Open the battery door.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn to the bottom of the camera.
-
Remove the two Phillips screws located directly below the back monitor
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn the camera to the side with the memory card slot and open the compartment for the CF card.
-
Remove the top two Phillips screws closest to the back panel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn to the back of the camera.
-
Remove the top most Phillips screw on the back panel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn to the last side of the back panel.
-
Remove the Phillips screw below the eyepiece.
-
Remove the Phillips screw located above the speaker.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Now gently unplug the two wires at the bottom of the panel.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.