Saltar al contenido principal

Introducción

This guide shows how to replace the motherboard and battery housing. This can be replaced if there are any issues with the battery connectivity or the board blows out.

  1. Nikon Coolpix B700 Motherboard Replacement, Back Frame Assembly: paso 1, imagen 1 de 1
    • Use the Phillips screwdriver to remove the two 5.5 mm screws on the left side of the camera.

  2. Nikon Coolpix B700 Motherboard Replacement: paso 2, imagen 1 de 1
    • Use the Phillips screwdriver to remove seven 5.5 mm screws from the bottom of the camera.

  3. Nikon Coolpix B700 Motherboard Replacement: paso 3, imagen 1 de 2 Nikon Coolpix B700 Motherboard Replacement: paso 3, imagen 2 de 2
    • Use the Phillips screwdriver to remove the two 5.5mm screws on the right side of the camera.

    • Open the HDMI flap to remove a 5.5mm screw.

    • Don't forget to replace the hidden screw under the HDMI flap during reassembly.

  4. Nikon Coolpix B700 Motherboard Replacement: paso 4, imagen 1 de 1
    • Use the Phillips screwdriver to remove the two 5.5mm screws under the LCD panel.

  5. Nikon Coolpix B700 Motherboard Replacement: paso 5, imagen 1 de 3 Nikon Coolpix B700 Motherboard Replacement: paso 5, imagen 2 de 3 Nikon Coolpix B700 Motherboard Replacement: paso 5, imagen 3 de 3
    • Open the flash assembly and insert the spudger into the slot under the flash unit and twist.

    • While twisting, pry apart the shell to split the camera in half.

  6. Nikon Coolpix B700 Motherboard Replacement: paso 6, imagen 1 de 1
    • Be careful not to damage the ribbons that connect the halves together.

  7. Nikon Coolpix B700 Motherboard Replacement: paso 7, imagen 1 de 2 Nikon Coolpix B700 Motherboard Replacement: paso 7, imagen 2 de 2
    • Place the pry tool under the black latch. Lift gently until the latch flips up.

    • Gently pull the ribbon away from the latch.

    • Be gentle when taking ribbons out and apart because they are fragile.

  8. Nikon Coolpix B700 Motherboard Replacement, Internal Bracket: paso 8, imagen 1 de 1
    • Use the Phillips screwdriver to remove the remaining five 5.55mm screws.

    • Remove the single 6mm screw.

  9. Nikon Coolpix B700 Motherboard Replacement: paso 9, imagen 1 de 1
    • Insert the pry tool under the latch and gently lift up to remove the ribbon.

  10. Nikon Coolpix B700 Motherboard Replacement: paso 10, imagen 1 de 1
    • Move the ribbon out of the way to reveal the hidden screw.

  11. Nikon Coolpix B700 Motherboard Replacement: paso 11, imagen 1 de 1
    • Lift the button assembly gently to give access to remove the 4mm screw.

  12. Nikon Coolpix B700 Motherboard Replacement: paso 12, imagen 1 de 1
    • On the top of the camera, remove the 6mm screw.

  13. Nikon Coolpix B700 Motherboard Replacement: paso 13, imagen 1 de 2 Nikon Coolpix B700 Motherboard Replacement: paso 13, imagen 2 de 2
    • With the spudger tool gently pry off the white tap holding in the bracket.

    • Use the same tool to remove the glued-on ribbon.

  14. Nikon Coolpix B700 Motherboard Replacement: paso 14, imagen 1 de 2 Nikon Coolpix B700 Motherboard Replacement: paso 14, imagen 2 de 2
    • Gently lift up the button assembly to slide the bracket out.

  15. Nikon Coolpix B700 Motherboard Replacement: paso 15, imagen 1 de 2 Nikon Coolpix B700 Motherboard Replacement: paso 15, imagen 2 de 2
    • With the pry tool gently lift up the latch and pull the cable toward the lens assembly.

    • Use the pry tool again and place it under the ribbon and lift straight up to disconnect the ribbon.

  16. Nikon Coolpix B700 Motherboard Replacement, Motherboard: paso 16, imagen 1 de 1
    • Use the metal spudger to open the latch to remove the ribbon.

  17. Nikon Coolpix B700 Motherboard Replacement: paso 17, imagen 1 de 1
    • Use the Phillips screwdriver to remove the single 6 mm screw.

  18. Nikon Coolpix B700 Motherboard Replacement: paso 18, imagen 1 de 2 Nikon Coolpix B700 Motherboard Replacement: paso 18, imagen 2 de 2
    • Gently lift the button assembly. Slide the motherboard out from the shell.

  19. Nikon Coolpix B700 Motherboard Replacement: paso 19, imagen 1 de 2 Nikon Coolpix B700 Motherboard Replacement: paso 19, imagen 2 de 2
    • Desolder the black, gray, and white wires from the motherboard.

    • The motherboard is labeled with the wire colors.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Un comentario

Nikon b700 all sorts part demegs

Rathod Umesh - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 7

Todo El Tiempo: 433