Introducción
This guide is to be used to install the wrist strap holder in the case that the holder becomes damaged or no longer functioning properly due to overuse. A Phillips screwdriver will be needed to complete this installation.
Qué necesitas
-
-
Remove the wrist strap from the wrist strap holder by untying the string at the end of the wrist strap.
-
This will allow for the wrist strap to be pulled through the wrist strap holder.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
2 personas más completaron esta guía.