Repara tus cosas Comunidad Tienda

Nikon COOLPIX P500 Rear Case Replacement

Introducción

This is a guide that demonstrates how to isolate the rear case of your camera from the rest of the device.

Qué necesitas

  1. Nikon COOLPIX P500 Rear Case Replacement, Battery: paso 1, imagen 1 de 2 Nikon COOLPIX P500 Rear Case Replacement, Battery: paso 1, imagen 2 de 2

    • Electric shock is a huge risk if the battery is not removed while taking the camera apart.

    • Press down and forward on the battery cover latch.

    • Push the orange latch, in the direction of the arrow on it, to release the battery.

    Traducir

  2. Nikon COOLPIX P500 Rear Case Replacement, Rear Case: paso 2, imagen 1 de 3 Nikon COOLPIX P500 Rear Case Replacement, Rear Case: paso 2, imagen 2 de 3 Nikon COOLPIX P500 Rear Case Replacement, Rear Case: paso 2, imagen 3 de 3

    • Remove the marked 3mm screws.

    • Separate the two parts of the body of the camera slightly.

    • Make sure not to pull too hard because there are connector ribbons.

    • Detach the connector ribbons before fully separating the camera into two pieces.

    Traducir

  4. Nikon COOLPIX P500 Rear Case Replacement: paso 3, imagen 1 de 1

    • Remove the labeled 3mm screws using a PH00 screwdriver.

    Traducir

  5. Nikon COOLPIX P500 Rear Case Replacement: paso 4, imagen 1 de 1

    • Remove the brown metal plate.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 5 otros colaboradores

Kevin Scott

Miembro Desde 01/22/15

517 Reputación

3 Guías creadas

Insignias: 15

+ 12 más insignias

Equipo

Cal Poly, Team 19-10, Maness Winter 2015 Miembro de Cal Poly, Team 19-10, Maness Winter 2015

CPSU-MANESS-W15S19G10

4 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 6

Todo El Tiempo: 1,018