Saltar al contenido principal

Nike SportWatch GPS Front Panel Replacement

Qué necesitas

  1. Nike SportWatch GPS Front Panel Replacement, Front Panel: paso 1, imagen 1 de 1
    • Face the watch upside down so that the back of the watch is exposed. Unscrew the six size #000 5 mm long screws on the back using a size 000 Phillips head screwdriver.

  2. Nike SportWatch GPS Front Panel Replacement: paso 2, imagen 1 de 1
    • Carefully separate the watch by pulling the band away from the main board.

  3. Nike SportWatch GPS Front Panel Replacement: paso 3, imagen 1 de 1
    • Two size #000 2.5 mm long screws will appear at the top of the main board. Unscrew them using a size 000 Phillips head screwdriver.

  4. Nike SportWatch GPS Front Panel Replacement: paso 4, imagen 1 de 1
    • Carefully use the blue plastic opening tool to pry the main board out of the front panel.

    • Make sure to be gentle so the ribbon cable that connects to the band does not break, it is fragile and not removable.

  5. Nike SportWatch GPS Front Panel Replacement: paso 5, imagen 1 de 1
    • Use an iOpener that has been heated in the microwave for about a minute, or until warm. Place it on the front screen of the watch. Let it rest there for a minute.

    • If you are unfamiliar with this tool use the iOpener guide here

  6. Nike SportWatch GPS Front Panel Replacement: paso 6, imagen 1 de 1
    • Push the panel out from the back of the screen, using your fingers.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ian Eichorn

Miembro Desde 10/22/15

678 Reputación

4 Guías creadas

Equipo

UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015 Miembro de UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015

UMASSD-GULBRANDSEN-F15S5G8

3 Miembros

5 Guías creadas

Un comentario

Where I can find the replacement glass? regards

Erick Sobreiro - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 1,253