Saltar al contenido principal

Introducción

This repair might be needed if your NikePlus Sportband screen has been damaged due to being drop or stepping on the device.

Partes

No se especificaron partes.

  1. To begin the disassembly of your NikePlus Sportband, first remove the device from the rubber wristband. To begin the disassembly of your NikePlus Sportband, first remove the device from the rubber wristband.
    • To begin the disassembly of your NikePlus Sportband, first remove the device from the rubber wristband.

  2. Finish the disassembly of your NikePlus Sportband by utilizing the metal spudger tool on the short edge to pry the external body pieces apart. Finish the disassembly of your NikePlus Sportband by utilizing the metal spudger tool on the short edge to pry the external body pieces apart.
    • Finish the disassembly of your NikePlus Sportband by utilizing the metal spudger tool on the short edge to pry the external body pieces apart.

  3. Baterías para ordenadores portátiles

    Un pequeño arreglo para un gran resultado.

    Comprar Ahora

    Baterías para ordenadores portátiles

    Un pequeño arreglo para un gran resultado.

    Comprar Ahora
  4. After the cover had been removed, use the metal spudger tool to remove the body of the device from the casing. After the cover had been removed, use the metal spudger tool to remove the body of the device from the casing.
    • After the cover had been removed, use the metal spudger tool to remove the body of the device from the casing.

  5. Use the metal tweezers to pry the screen casing from the body of the device. The screen casing is fastened to the body  of the device by four clips located in each corner of the casing. The screen casing is fastened to the body  of the device by four clips located in each corner of the casing.
    • Use the metal tweezers to pry the screen casing from the body of the device.

    • The screen casing is fastened to the body of the device by four clips located in each corner of the casing.

  6. Flip the body of the device over so that the screen is now on the bottom. The display ribbon cable is soldered to the motherboard. We were able to peel up the ribbon cable with a pair of tweezers.
    • Flip the body of the device over so that the screen is now on the bottom.

    • The display ribbon cable is soldered to the motherboard. We were able to peel up the ribbon cable with a pair of tweezers.

    • Successfully resoldering this ribbon cable to the motherboard may prove difficult to the very small traces.

  7. Flip the body of the device back over so that the screen is facing up. Using the tweezers, gently lift the screen from body of the device. Using the tweezers, gently lift the screen from body of the device.
    • Flip the body of the device back over so that the screen is facing up.

    • Using the tweezers, gently lift the screen from body of the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Daniel Burtner

Miembro Desde 15/02/16

101 Reputación

1 Guía escrita

Equipo

IUPUI, Team 9-9, Wilson Spring 2016 Miembro de IUPUI, Team 9-9, Wilson Spring 2016

IUPUI-WILSON-S16S9G9

5 Miembros

4 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 141