Saltar al contenido principal
Sólo Prerrequisito
Sólo Prerrequisito
Esta guía solo debería usarse como prerrequisito para otras guías. Por tanto, estará incompleta.
Sólo Prerrequisito

Qué necesitas

  1. Nexus S Rear Inner Frame Replacement, Rear Inner Frame: paso 1, imagen 1 de 1
    • Remove the six Phillips screws securing the rear inner frame to the inner case.

  2. Nexus S Rear Inner Frame Replacement: paso 2, imagen 1 de 1
    • Insert the flat edge of a plastic opening tool in between the rear inner frame and the top left corner of the Nexus S.

    • Pry the opening tool upwards to pop the top right corner from the clips securing it to the inner assembly.

  3. Nexus S Rear Inner Frame Replacement: paso 3, imagen 1 de 2 Nexus S Rear Inner Frame Replacement: paso 3, imagen 2 de 2
    • Insert the plastic opening tool to the right of the power button.

    • Slide the plastic opening tool downwards along the perimeter of the Nexus S to release the clips on the right side.

  4. Nexus S Rear Inner Frame Replacement: paso 4, imagen 1 de 2 Nexus S Rear Inner Frame Replacement: paso 4, imagen 2 de 2
    • In the same manner as previously described, release the bottom clips located near the bottom of the Nexus S.

  5. Nexus S Rear Inner Frame Replacement: paso 5, imagen 1 de 1
    • Insert and pry the plastic opening tool to release the final clip securing the rear inner frame to the inner assembly.

  6. Nexus S Rear Inner Frame Replacement: paso 6, imagen 1 de 1
    • Lift and remove the rear inner frame from the Nexus S.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 291