1. Turn the device over so it is upside-down.
    • Turn the device over so it is upside-down.

    Agregar Comentario

  2. Unscrew the 4 screws closest to the screen.
    • Unscrew the 4 screws closest to the screen.

    Agregar Comentario

    • Flip over the device so it is right side up.

    Agregar Comentario

    • Unscrew the 2 screws on the top of the device, next to the docking plug.

    Agregar Comentario

    • Take off top piece by using slight force and pulling off.

    Agregar Comentario

    • Unscrew the button board with smaller screwdriver.

    Agregar Comentario

    • Lift off the button board.

    Agregar Comentario

    • Unscrew all visible of the screws on the black logic board cover with the larger screwdriver.

    Agregar Comentario

    • Lift the screen vertically straight up.

      • As you do this the logic board should move off with it.

    Agregar Comentario

    • Flip the screen and the logic board over to the right side.

    Agregar Comentario

    • Pull out the white plug that goes from the speakers to the logic board.

    • Then plug back in making sure it is completely connected.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Michelle Read

Miembro Desde 26/09/12

1 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 7-50, Forte Fall 2012 Miembro de Cal Poly, Team 7-50, Forte Fall 2012

CPSU-FORTE-F12S7G50

5 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 300