Newport e500 Right Side Panel Disassembly - Guía de reparación iFixit

Introducción

In order to replace most other parts in the Newport e500, the removal of the right side panel is required. In order to perform this operation, a Philips screwdriver and torque wrench will be required. For more information refer to page 41 of the service manual.

Qué necesitas

Paso 1 Newport e500 Top Cover Disassembly

Newport e500 Right Side Panel Disassembly, Newport e500 Top Cover Disassembly: paso 1, imagen 1 de 1

Place device so that the top cover is facing you.
Open the top cover.

Paso 2

Newport e500 Right Side Panel Disassembly: paso 2, imagen 1 de 1

Remove the four hex nuts and lock washers (two at each hinge) that secure the cover to the hinges on the left side of the pneumatic box.

Paso 3

Newport e500 Right Side Panel Disassembly: paso 3, imagen 1 de 1

Remove the cover and set aside. Retain hardware for re-assembly.

Paso 4 Newport e500 Right Side Panel Disassembly

Newport e500 Right Side Panel Disassembly, Newport e500 Right Side Panel Disassembly: paso 4, imagen 1 de 1

Carefully place the GDU on its left side.

Paso 5

Newport e500 Right Side Panel Disassembly: paso 5, imagen 1 de 1

Remove the four screws and washers at the top edge of the right side panel.

Paso 6

Newport e500 Right Side Panel Disassembly: paso 6, imagen 1 de 1

Remove the two screws and washers from the underside of the right side panel.

Paso 7

Newport e500 Right Side Panel Disassembly: paso 7, imagen 1 de 1

Remove the right side panel. Retain hardware for re-assembly.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Jeremy

Miembro Desde 04/07/20

589 Reputación

6 Guías creadas

+ 2 más insignias

Equipo

Cal Poly, Team S7-G16, Paton Spring 2020 Miembro de Cal Poly, Team S7-G16, Paton Spring 2020

CPSU-PATON-S20S7G16

3 Miembros

13 Guías creadas

0 comentarios

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 59