Repara tus cosas Únete a la comunidad Tienda

Newport e360 Exhalation Flow Sensor Replacement

Introducción

Replacing the Exhalation Flow Sensor should be relatively quick and easy. There are no tools needed in this replacement. Make sure to give yourself time to thoroughly read through the instructions.

For more information on replacing the exhalation flow sensor, please refer to page 4-2 in the service manual.

Qué necesitas

  1. Newport e360 Exhalation Flow Sensor Replacement, Exhalation Flow Sensor: paso 1, imagen 1 de 1

    • Turn off ventilator before starting this repair.

    • Shut off or disconnect the air and oxygen gas supplies before starting this repair.

    Editar

  2. Newport e360 Exhalation Flow Sensor Replacement: paso 2, imagen 1 de 1

    • To avoid damaging equipment, always use standard electrostatic discharge (ESD) precautions

    • Put on an ESD wrist strap or ESD gloves

    Editar

  4. Newport e360 Exhalation Flow Sensor Replacement: paso 3, imagen 1 de 1

    • Open the Front Panel Door on the lower left front of the ventilator to expose Exhalation Valve EXH2105A and Flow Sensor FLS2101P.

    Editar

  5. Newport e360 Exhalation Flow Sensor Replacement: paso 4, imagen 1 de 1

    • Remove the Exhalation Valve EXH2105A by releasing the retaining latch.

    Editar

  6. Newport e360 Exhalation Flow Sensor Replacement: paso 5, imagen 1 de 1

    • Disconnect the Flow Sensor Cable CBL2123P from the plastic body of the Flow Sensor FLS2101P by pulling cable straight up. Do not twist.

    Editar

  7. Newport e360 Exhalation Flow Sensor Replacement: paso 6, imagen 1 de 1

    • With a twisting motion, pull the plastic Flow Sensor FLS2101P away from the outlet of the Exhalation Valve EXH2105A.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 1 otro colaborador

Lauren Ochoa

Miembro Desde 04/13/20

165 Reputación

1 Guía escrita

Insignias: 7

+ 4 más insignias

Equipo

Cal Poly, Team S7-G21, Paton Spring 2020 Miembro de Cal Poly, Team S7-G21, Paton Spring 2020

CPSU-PATON-S20S7G21

3 Miembros

3 Guías creadas

Un comentario

I need this Exhalation Valve EXH2105A part, does anyone have a replacement?

Remigio Rodriguez - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 23

Todo El Tiempo: 398