Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a #1 Phillips screwdriver to remove the 10 -mm screw that secures the battery plate, then remove the battery cover using your hands.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the seven 10-mm black Phillips screws from the blaster casing with a #1 Phillips Screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Slowly pull apart the blaster casing, starting at the battery location.
-
Keep pulling apart slowly until it separates completely. Be cautious as to not send the internal components flying.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the firing trigger by grabbing the trigger with your fingers and pulling it up and out.
-
Cancelar: No complete esta guía.
4 personas más completaron esta guía.