Repara tus cosas Comunidad Tienda

Neato Botvac D8000 Brushes Replacement

Introducción

If your robot is passing over surfaces and not collecting debris, by cleaning or replacing the brushes could help.

Here are step by step instructions in how to get to the brushes.

Qué necesitas

  1. Neato Botvac D8000 Brushes Replacement, Brushes: paso 1, imagen 1 de 1

    • Place the vacuum on its back so the brushes are visible.

    Editar

  2. Neato Botvac D8000 Brushes Replacement: paso 2, imagen 1 de 3 Neato Botvac D8000 Brushes Replacement: paso 2, imagen 2 de 3 Neato Botvac D8000 Brushes Replacement: paso 2, imagen 3 de 3

    • Remove the four 10 mm screws with a Torx T10 screwdriver.

    Editar

  4. Neato Botvac D8000 Brushes Replacement: paso 3, imagen 1 de 2 Neato Botvac D8000 Brushes Replacement: paso 3, imagen 2 de 2

    • Remove the rotary brush simply by grabbing it firmly and pulling it off.

    • Once you have removed your rotary brush and 4 bolts, you can easy remove the brush guard.

    Editar

  5. Neato Botvac D8000 Brushes Replacement: paso 4, imagen 1 de 2 Neato Botvac D8000 Brushes Replacement: paso 4, imagen 2 de 2

    • Remove the brush by simply pulling it out.

    • From there you can clean it or replace the brush with a new one.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 1 otro colaborador

Yeritza Quiroz

Miembro Desde 03/22/18

159 Reputación

1 Guía escrita

Insignias: 2

Equipo

Sam Houston State, Team S17-G6, Blackburne Spring 2018 Miembro de Sam Houston State, Team S17-G6, Blackburne Spring 2018

SHSU-BLACKBURNE-S18S17G6

4 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 7

Todo El Tiempo: 697