Neato Botvac D8000 Air Filter Replacement

Introducción

This is a step-by-step instruction guide on how to replace the air filter. This may be needed if robot is not collecting dust or may need a cleaning.

Grasp the top latch of the filter cover and gently lift up to reveal the air filter.

After you take out the holster from the robot, pull the tab to remove the filter.

Once the filter has been completely removed, you may clean or replace the filter.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Miembro Desde 03/22/18

148 Reputación

1 Guía escrita

SHSU-BLACKBURNE-S18S17G6

4 Miembros

10 Guías creadas