Repara tus cosas Comunidad Tienda

Neato Botvac 80 Rear Bumper Replacement

Introducción

This is a prerequisite guide to remove the rear bumper. Most repairs/ replacements will require you to remove the bumper and this guide will help you out.

  1. Neato Botvac 80 Rear Bumper Replacement, Rear Bumper: paso 1, imagen 1 de 1

    • Grab the rear bumper with both hands on either side.

    Editar

  3. Neato Botvac 80 Rear Bumper Replacement: paso 2, imagen 1 de 1

    • Pull the left and right sides away from the machine to unclip the bumper. This requires that you bend the plastic a little bit. Unclip one side a little bit and allow the prong to rest on the side of the machine. Then unclip the other side and pull off the bumper parallel to both sides

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Brandon Blank

Miembro Desde 02/02/17

675 Reputación

5 Guías creadas

Insignias: 11

+ 8 más insignias

Equipo

USF Tampa, Team 17-5, Blackwell Spring 2017 Miembro de USF Tampa, Team 17-5, Blackwell Spring 2017

USFT-BLACKWELL-S17S17G5

3 Miembros

12 Guías creadas

Un comentario

Is the rear bumper a single piece that is both upper and lower part joined?

Sanjukta - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 10

Ultimos 30 días: 12

Todo El Tiempo: 1,445