Repara tus cosas Comunidad Tienda

Nabi Jr Speakers Replacement

Qué necesitas

  1. Nabi Jr Speakers Replacement, Rear Case: paso 1, imagen 1 de 1

    • Remove the red rubber case from the device. This should come off with ease.

    Traducir

  2. Nabi Jr Speakers Replacement: paso 2, imagen 1 de 1

    • Turn the device so the screen is facing away from you.

    • Using a philips head, size #00, screwdriver, remove the screws in each corner of the plastic casing.(total of 4 screws)

    Traducir

  4. Nabi Jr Speakers Replacement: paso 3, imagen 1 de 1

    • Remove the device casing using a small plastic pry bar.

    • This might take a little bit of force to accomplish, don't be afraid to go at it with a little gusto.

    Traducir

  5. Nabi Jr Speakers Replacement: paso 4, imagen 1 de 1

    • After loosening the back cover, remove it from the device so you can get at the innards.

    Traducir

  6. Nabi Jr Speakers Replacement, Speakers: paso 5, imagen 1 de 1

    • The speakers are located near the top of the device close to the camera.

    • Using a desoldering tool, remove the speakers from the pads they are soldered to.

    • Note that the red wire is removed from the pad labeled with a "+" and the black wire comes from the pad labeled with a "-".

    • Solder the new speaker's wires onto their respective pads

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Tobias Young

Miembro Desde 03/24/15

27 Reputación

2 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

UMass Dartmouth, Team 4-3, Vijaybhaskar Spring 2015 Miembro de UMass Dartmouth, Team 4-3, Vijaybhaskar Spring 2015

UMASSD-VIJAYBHASKAR-S15S4G3

3 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 831