Introducción
To get inside the console, both housing parts need to be taken apart.
Qué necesitas
-
-
Remove the six 13.50mm PH2 screws from the base plate.
-
Now take off the upper part of the housing.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.
Un agradecimiento especial a estos traductores:
100%
Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›