Mr. Coffee 12-Cup Coffee Maker BVMC-EHXX33 Hose Replacement

Introducción

Is your Mr. Coffee 12-cup coffee perking slowly or not at all? If you have cleaned the coffee maker without improvement in perk time, it may be a faulty hose. This guide will help you successfully replace the hose giving the coffeemaker a longer life.

Qué necesitas

Paso 1 Hose Replacement

Mr. Coffee 12-Cup Coffee Maker BVMC-EHXX33 Hose Replacement, Hose Replacement: paso 1, imagen 1 de 1

Unplug the coffee maker.
Empty the coffee maker reservoir.

Editar

Paso 2

Flip the coffee maker upside down.
Remove the six 13.5 mm screws from the bottom of the coffee maker using a Phillips #3 screwdriver.

Editar

Paso 3

Remove the base using an opening tool.

Editar

Paso 4

Pinch the metal ties with a pair of needle-nose pliers.
Slide the metal tie off the metal tube base.

Editar

Paso 5

Mr. Coffee 12-Cup Coffee Maker BVMC-EHXX33 Hose Replacement: paso 5, imagen 3 de 3

Use a spudger to push against the plastic tubing and slide it off the metal tube base.

Editar

Paso 6

Using a pair of needle-nose pliers, pinch the metal ties together and slide the metal tie up off of the base.

Editar

Paso 7

To remove the tube, pinch the tubing and pull until it pops off.

Editar

Paso 8

Remove any debris from the base. If the filter is corroded, remove the filter by squeezing the filter and move it up the base of the tube until it comes out.

Editar