Saltar al contenido principal

Moultrie I45 GameSpy Casing Replacement

Qué necesitas

  1. Moultrie I45 GameSpy Casing Replacement, Casing: paso 1, imagen 1 de 1
    • Using a Philips head screwdriver, remove the eight 6mm screws located at the bottom of the device.

  2. Moultrie I45 GameSpy Casing Replacement: paso 2, imagen 1 de 1
    • Remove the butterfly nut from the lid arm.

  3. Moultrie I45 GameSpy Casing Replacement: paso 3, imagen 1 de 1
    • Remove the lid-covering.

  4. Moultrie I45 GameSpy Casing Replacement: paso 4, imagen 1 de 1
    • Using a Phillips head screwdriver, remove the six 4mm screws from the face of the camera.

  5. Moultrie I45 GameSpy Casing Replacement: paso 5, imagen 1 de 1
    • Gently separate the two halves of the case.

    • The two halves are connected by a wire. Pulling too roughly can damage the wires and cause the camera to stop functioning.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Sean Hill

Miembro Desde 01/29/15

485 Reputación

4 Guías creadas

Equipo

UW Tacoma, Team 3-7, Rose Winter 2015 Miembro de UW Tacoma, Team 3-7, Rose Winter 2015

UWT-ROSE-W15S3G7

3 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 225