Repara tus cosas Comunidad Tienda

Motorola syn1654A Speaker Module Replacement

Introducción

Before proceeding with the replacement guide, please ensure the headphones are unplugged from any device.

Qué necesitas

  1. Motorola syn1654A Speaker Module Replacement, Speaker Module: paso 1, imagen 1 de 2 Motorola syn1654A Speaker Module Replacement, Speaker Module: paso 1, imagen 2 de 2

    • See the speaker replacement guide and follow steps 1 and 2.

    Editar

  2. Motorola syn1654A Speaker Module Replacement: paso 2, imagen 1 de 1

    • Use the T6 torx screwdriver to remove the seven screws located around the headphone cover and place the screws in a safe place.

    • To avoid stripping screws, be sure to use the right drill bit oriented perpendicular to the face of the screw.

    Editar

  4. Motorola syn1654A Speaker Module Replacement: paso 3, imagen 1 de 1

    • Carefully lift the speaker out of its housing while leaving all wires connected.

    Editar

  5. Motorola syn1654A Speaker Module Replacement: paso 4, imagen 1 de 1

    • Lift the module out of the headphone cup, leaving all wires attached.

    • Clip the two wires circled in orange.

    • Now that the speaker is free set it aside.

    • Clip the two wires circled in yellow.

    • Replace speaker module and solder it to the two wires circled in orange.

    • Now solder the speaker wires (circled in yellow) back to the module.

    • For soldering see the ifixit soldering guide: Cómo soldar y desoldar conexiones

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Ben

Miembro Desde 02/24/14

104 Reputación

1 Guía escrita

Insignias: 7

+ 4 más insignias

Equipo

Michigan Tech, Team 5-1, Lauer Spring 2014 Miembro de Michigan Tech, Team 5-1, Lauer Spring 2014

MTU-LAUER-S14S5G1

2 Miembros

3 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 240