Saltar al contenido principal

Introducción

Before proceeding with the replacement guide, please ensure the headphones are unplugged from any device.

Partes

  1. Remove leather headphone cushion by pulling edge towards middle of headphone.
    • Remove leather headphone cushion by pulling edge towards middle of headphone.

    • It should slip off the device.

  2. Carefully peel back foam pad to prevent tearing.
    • Carefully peel back foam pad to prevent tearing.

    • It is glued at both the top and bottom.

  3. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  4. Use the T6 torx screwdriver to remove the three screws holding the speaker in place.
    • Use the T6 torx screwdriver to remove the three screws holding the speaker in place.

    • To avoid stripping screws, be sure to use the right screw bit oriented perpendicular to the face of the screw.

  5. With the speaker removed from the speaker module, clip the black and white wires on the back of the speaker, as shown.
    • With the speaker removed from the speaker module, clip the black and white wires on the back of the speaker, as shown.

    • Solder wires onto corresponding pads of replacement speaker.

    • For soldering see the ifixit soldering guide: Cómo soldar y desoldar conexiones

Conclusión

To reassemble your device, follow these instructions in reverse order.

John Ware

Miembro Desde 24/02/14

325 Reputación

2 Guías creadas

Equipo

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 227