Saltar al contenido principal

Motorola i850 Speaker Replacement

Qué necesitas

  1. Motorola i850 Speaker Replacement, LCD Board: paso 1, imagen 1 de 1
    • Open the flip cover of the phone with the LCD screen facing towards you.

  2. Motorola i850 Speaker Replacement: paso 2, imagen 1 de 2 Motorola i850 Speaker Replacement: paso 2, imagen 2 de 2
    • Use a Razor Blade to remove the screw covers.

    • Razor Blade is very sharp. Use caution.

  3. Motorola i850 Speaker Replacement: paso 3, imagen 1 de 1
    • Unscrew the screws using a Phillips #00 Screwdriver.

  4. Motorola i850 Speaker Replacement: paso 4, imagen 1 de 1
    • Insert a Spudger into the side crack of the flip cover and slowly separate the phone cover from the case.

  5. Motorola i850 Speaker Replacement: paso 5, imagen 1 de 1
    • Gently separate the flip cover case from the phone with your hands when the crack is wide enough.

  6. Motorola i850 Speaker Replacement: paso 6, imagen 1 de 1
    • Partially close the flip cover of the phone in order to take off the outer case.

  7. Motorola i850 Speaker Replacement: paso 7, imagen 1 de 1
    • Completely remove the outer casing from the phone.

  8. Motorola i850 Speaker Replacement: paso 8, imagen 1 de 2 Motorola i850 Speaker Replacement: paso 8, imagen 2 de 2
    • Place your thumb underneath the protective metal covering to remove it from the phone.

  9. Motorola i850 Speaker Replacement: paso 9, imagen 1 de 1
    • Gently detach the black microchip from the phone with a Tweezer.

  10. Motorola i850 Speaker Replacement: paso 10, imagen 1 de 1
    • Prop out the LCD board from the phone using your fingertips.

  11. Motorola i850 Speaker Replacement: paso 11, imagen 1 de 2 Motorola i850 Speaker Replacement: paso 11, imagen 2 de 2
    • Remove the LCD board from the phone by grabbing the bottom side of the LCD board.

  12. Motorola i850 Speaker Replacement, Speaker: paso 12, imagen 1 de 1
    • Use a flathead screwdriver to gently remove the speaker.

  13. Motorola i850 Speaker Replacement: paso 13, imagen 1 de 1
    • Insert the new speaker into the phone and it should look like the image at left.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Kevin Dermody

Miembro Desde 04/08/10

1 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 34-56, Forte Spring 2010 Miembro de Cal Poly, Team 34-56, Forte Spring 2010

CPSU-FORTE-S10S34G56

4 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 1

Todo El Tiempo: 1,143