Introducción

Replace the speaker in the phone.

Partes

No se requieren partes.

  1. Open the flip cover of the phone with the LCD screen facing towards you.
    • Open the flip cover of the phone with the LCD screen facing towards you.

  2. Use a Razor Blade to remove the screw covers. Razor Blade is very sharp. Use caution.
    • Use a Razor Blade to remove the screw covers.

    • Razor Blade is very sharp. Use caution.

  3. Unscrew the screws using a Phillips #00 Screwdriver.
    • Unscrew the screws using a Phillips #00 Screwdriver.

  4. Insert a Spudger into the side crack of the flip cover and slowly separate the phone cover from the case.
    • Insert a Spudger into the side crack of the flip cover and slowly separate the phone cover from the case.

  5. Gently separate the flip cover case from the phone with your hands when the crack is wide enough.
    • Gently separate the flip cover case from the phone with your hands when the crack is wide enough.

  6. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda

    ¿Alguna vez arreglaste algo? Eso es genial.

    Comparte tu historia de reparación con #SoyUnGenio

    Todos somos Genios

    Comparte tu historia de reparación con #SoyUnGenio

  7. Partially close the flip cover of the phone in order to take off the outer case.
    • Partially close the flip cover of the phone in order to take off the outer case.

  8. Completely remove the outer casing from the phone.
    • Completely remove the outer casing from the phone.

  9. Place your thumb underneath the protective metal covering to remove it from the phone. Place your thumb underneath the protective metal covering to remove it from the phone.
    • Place your thumb underneath the protective metal covering to remove it from the phone.

  10. Gently detach the black microchip from the phone with a Tweezer.
    • Gently detach the black microchip from the phone with a Tweezer.

  11. Prop out the LCD board from the phone using your fingertips.
    • Prop out the LCD board from the phone using your fingertips.

  12. Remove the LCD board from the phone by grabbing the bottom side of the LCD board. Remove the LCD board from the phone by grabbing the bottom side of the LCD board.
    • Remove the LCD board from the phone by grabbing the bottom side of the LCD board.

  13. Use a flathead screwdriver to gently remove the speaker.
    • Use a flathead screwdriver to gently remove the speaker.

  14. Insert the new speaker into the phone and it should look like the image at left.
    • Insert the new speaker into the phone and it should look like the image at left.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Kevin Dermody

Miembro Desde 08/04/10

1 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 34-56, Forte Spring 2010 Miembro de Cal Poly, Team 34-56, Forte Spring 2010

CPSU-FORTE-S10S34G56

4 Miembros

10 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 1,087