Introducción

Once the back cover has been removed, the microphone can be accessed as shown in this guide.

Partes

No se requieren partes.

  1. Slide the cover release button towards the bottom of the phone
    • Slide the cover release button towards the bottom of the phone

    • Once the battery cover pops up, slide the cover towards the top of the phone and lift up.

    Agregar Comentario

  2. Push the battery towards the top of the phone and lift up.
    • Push the battery towards the top of the phone and lift up.

    Agregar Comentario

    • With a T5 screwdriver, unscrew the four T5 sized screws that hold the case back cover onto the rest of the case.

    • Remove the plastic case back cover by gently pulling it away from the body of the phone, starting at one edge and working your way down to the other.

    Agregar Comentario

    • Lift the circuit board away from the case of the phone, being careful not to break the wire that goes up into the hinge. This will give you access to the microphone.

    • The microphone sits just below the keys on the front cover molding.

    • Grasp the microphone with tweezers and lift it out of the front cover.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Carson Meena

Miembro Desde 22/10/12

16 Reputación

5 Guías creadas

Equipo

Clemson, Team 14-2, Benson Fall 2012 Miembro de Clemson, Team 14-2, Benson Fall 2012

CLEM-BENSON-F12S14G2

4 Miembros

17 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 235