Saltar al contenido principal

Motorola XOOM 2 Media Edition Touch Screen Replacement

Qué necesitas

  1. Motorola XOOM 2 Media Edition Touch Screen Replacement, Motorola XOOM 2 Media Edition Disassembly: paso 1, imagen 1 de 2 Motorola XOOM 2 Media Edition Touch Screen Replacement, Motorola XOOM 2 Media Edition Disassembly: paso 1, imagen 2 de 2
    • Power off the device before beginning disassembly.

    • Remove six 2.7mm Torx #3 screws.

  2. Motorola XOOM 2 Media Edition Touch Screen Replacement: paso 2, imagen 1 de 2 Motorola XOOM 2 Media Edition Touch Screen Replacement: paso 2, imagen 2 de 2
    • There is adhesive attached to the underside of the back panel. Gradually lift the panel to avoid bending it out of shape.

    • Pry off the back panel using a plastic opening tool.

    • Using a plastic opening tool, slide the tool gently around the back cover to lift the cover off.

  3. Motorola XOOM 2 Media Edition Touch Screen Replacement: paso 3, imagen 1 de 3 Motorola XOOM 2 Media Edition Touch Screen Replacement: paso 3, imagen 2 de 3 Motorola XOOM 2 Media Edition Touch Screen Replacement: paso 3, imagen 3 de 3
    • Pry off the black cover gradually using a plastic opening tool.

  4. Motorola XOOM 2 Media Edition Touch Screen Replacement, Touch Screen: paso 4, imagen 1 de 2 Motorola XOOM 2 Media Edition Touch Screen Replacement, Touch Screen: paso 4, imagen 2 de 2
    • Remove thirteen 2.55mm Torx #4 screws with Torx T4 screwdriver.

  5. Motorola XOOM 2 Media Edition Touch Screen Replacement: paso 5, imagen 1 de 1
    • Use tweezers to pull up the white rubber cover.

  6. Motorola XOOM 2 Media Edition Touch Screen Replacement: paso 6, imagen 1 de 3 Motorola XOOM 2 Media Edition Touch Screen Replacement: paso 6, imagen 2 de 3 Motorola XOOM 2 Media Edition Touch Screen Replacement: paso 6, imagen 3 de 3
    • Use the tweezers to pull up the small chip from its receiver.

    • Use the tweezers to pull up the larger chip from its receiver.

    • There is adhesive attached to the back of the larger chip on the touchscreen controller strip.

    • Use the tweezers to pull up one end of the small piece of tape that is holding the touchscreen controller.

  7. Motorola XOOM 2 Media Edition Touch Screen Replacement: paso 7, imagen 1 de 2 Motorola XOOM 2 Media Edition Touch Screen Replacement: paso 7, imagen 2 de 2
    • Use the tweezers to pull up and release the thin handle that is attached to the LCD connector.

    • Use the tweezers to pull out the LCD connector from its receptor.

  8. Motorola XOOM 2 Media Edition Touch Screen Replacement: paso 8, imagen 1 de 2 Motorola XOOM 2 Media Edition Touch Screen Replacement: paso 8, imagen 2 de 2
    • Use a plastic opening tool to gradually separate the screen from the device.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 2

Todo El Tiempo: 619