Introducción

This repair guide shows how to replace the logic board.

  1. Press down on the back button while pulling away from the body of the phone to release the back cover.
    • Press down on the back button while pulling away from the body of the phone to release the back cover.

    Agregar Comentario

  2. Remove the battery from the phone by gently pulling upward on the battery with your fingers.
    • Remove the battery from the phone by gently pulling upward on the battery with your fingers.

    Agregar Comentario

    • Unscrew and remove the antenna by gripping the base and twisting clockwise.

    • Once the antenna has passed the threading, pull out.

    Agregar Comentario

    • Remove the screws from the upper side of the phone with the T6 Torx screwdriver.

    • The first screw is underneath where the antenna was and the other is visible to the right.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Insert the spudger under the left corner of the bottom plate.

    • Using a twist and pry motion seperate the bottom plate and work your way to the right.

    • This can be somewhat difficult and require a good deal of work.

    Agregar Comentario

    • Use the T6 Torx screwdriver to remove the bottom two screws.

    Agregar Comentario

    • Insert the spudger between the key plate and the back of the phone and work your way around the edge of the phone to pop keys off.

    • There is one clasp on either side that needs to be removed before the keys come off.

    • This step is extremely hard and may require time, strength, endurance, and multiple spudgers.

    Agregar Comentario

    • Pull the pressure plate forward to expose the logic board.

    • Use the spludger to pry off the plug that connects pressure pad to the logic board.

    • Remove the pressure pad.

    Agregar Comentario

    • Use the spudger to pry off the plug that connects logic board to the screen.

    Agregar Comentario

    • Remove the logic board.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Karl Sanders

Miembro Desde 26/01/10

8 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 8-49, Regan Winter 2010 Miembro de Cal Poly, Team 8-49, Regan Winter 2010

CPSU-REGAN-W10S8G49

5 Miembros

16 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 1,903