Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
How to replace the screen in the Motorola V710 phone
Qué necesitas
-
-
Insert the spudger between the gray and black plates of the screen casing.
-
Using a twist and pry motion work your way around the phone slowly prying the two plates apart.
-
Note: this part of the phone is glued and will require re-gluing to return the phone to its original state.
-
-
-
If you look at the side of the now exposed screen there should be a metal casing held onto the phone by two tabs.
-
Insert the spudger underneath one of the corners of the metal and bend it out enough to slip it over the tabs.
-
This metal is reasonably resistant to bending and will likely require a good deal of force to get it off the phone.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Equipo
Cal Poly, Team 8-49, Regan Winter 2010 Miembro de Cal Poly, Team 8-49, Regan Winter 2010
CPSU-REGAN-W10S8G49
5 Miembros
16 Guías creadas
